Fabrication

Westfield Engineering & Services has been providing engineering, operating, detailed design, fabrication, and construction management services to the gas processing industry since the 1970’s.

Our fabrication shop is a full-service, heavy-industry facility, located immediately adjacent to our main engineering offices on eight acres of land.

The fabrication facilities consists of: 50,000 ft2 Shop Area 60” X 335’ central bay w/ 27’ height under hook 40’ of stand up clearance 50-ton rail-mounted crane in central bay 60” X 335’ side bay 10-ton & 15-ton cranes in side bay Two 8,000-pound forklifts 14-ton Cherry Picker 18-ton Cherry Picker

Westfield Engineering & Services requires mill test reports on all structural/pipe and pressure vessel components from our suppliers. In addition, all these material undergo a Material Receiving Inspection, where grade, heat number, and slab number are verified prior to the material receiving a Shop Code Number. The respective purchase order number, heat number, slab number, and shop code number are then logged into a Material Control Log before the materials are released for construction. In this manner Quality Assurance documentation is complete and easily tracked.

We at Westfield Engineering & Services are proficient with the following welding procedures: SMAW — Shield Material Arc Welding SAW — Submerged Arc Welding FCAW — Flux Core Arc Welding GMAW — Gas Metal Arc Welding GTAW — Gas Tungsten Arc Welding

In addition to the above metals, we at Westfield Engineering & Services have experience with the following materials: Teflon-lined Metals Polypropylene-lined Metals Fiberglass Plastics Glass-lined pipes and vessels Polycarbonate resins

We also employ the additional techniques to all completed components: Vessel Inspection — as per AMSE QC Manual Pipe Inspection — as per ASME/ANSI Codes as per Westfield SOP Structural Inspection — as per Westfield SOP Paint Inspection — as per Westfield SOP Assembly Inspection — as per Westfield SOP I & E Inspection — as per Westfield SOP

Our Modular ACT Design allows you to quickly and efficiently assemble your new plant at your location with a minimal disruption to your current production schedule, as well as minimizing field-erection time. Be sure to link to our Modular ACT Design page for more details.

Located immediately behind our Fabrication Shop is our Assembly Yard, a six-acre facility, complete with 30,000 ft² concrete slab. Here we have the ability to completely assemble your new plant, allow you to inspect it, operate, and correct/amend any concerns before we ship it to your location. The unit located in the picture to the right has been assembled for an American customer for inspection, prior to being disassembled for transport. We also possess the ability to paint all of our fabricated equipment, allowing you to custom-fit your new plant to any color scheme you wish.

Call us at Westfield Engineering & Services to find out about our fabrication technology and capabilities.  If you'd like, feel free to contact us at any time for a tour or client list.  Whether we design or not, or if it's a single vessel or entire unit, Westfield Engineering & Services can fabricate it especially for you!